Melinex polyester enclosure for photographs

Description

This enclosure is designed to store photographs, photographic films and paper. It makes it possible to see the contents without taking them out. It is perfectly transparent and chemically neutral. The basic type of this enclosure is L-type where two adjoining edges are sealed.

It is possible to make enclosures of any dimensions which do not exceed 100x150 cm.

Types of enclosures: 
U-type enclosure – 3 edges are sealed
„sleeve” – 2 parallel edges are sealed 
In the case of orders for U-type and "sleeve" enclosures, 10% of the prices listed should be added. 

Material
  • Melinex polyester:
    - PAT certificate
    - 100% polyester
    - transparent
    - neutral pH 
    - thickness: 75 µm 
Certificate
PAT
sizer
Available sizes
Index Material Dimensions 1 - 99 100 - 499 500 and more Amount Total Sample
OB9X12 format 9x12 75 µm polyester 97x127 mm
...
...
...
...
OB9X13 9x13 format 75 µm polyester 97x137 mm
...
...
...
...
OB10X15 10x15 format 75 µm polyester 107x157 mm
...
...
...
...
OB13X18 13x18 format 75 µm polyester 137x187 mm
...
...
...
...
OB18X24 18x24 format 75 µm polyester 187x247 mm
...
...
...
...
OB24X30 24x30 format 75 µm polyester 247x307 mm
...
...
...
...
OB30X40 30x40 format 75 µm polyester 309x409 mm
...
...
...
...
OBNEG 35 mm negative 75 µm polyester 240x49 mm
...
...
...
...
Total: ...
Dimensions
  • length (a) 
  • width (b) 
Add custom formats
Index a (mm) b (mm) Amount Sample Comments
Brak
Omni-Box special formats

The Omni-Box system is a service whereby we produce single units and short series of archival storage products of non-standard constructions or in non-standard formats. 
See all products.

Who is Omni-Box for?

The Omni-Box storage products are mainly designed for those of our Clients who need:

  • one, a few or a few dozen units of storage products in a special, non-standard format;
  • to store a collection of books in such a manner that each volume is kept in a separate box;
  • storage products of non-standard construction.
How does it work?

First, our experienced designers make a computer design of a box or folder. After that, the product undergoes cutting and creasing by means of a digital plotter.

How should I measure an object to be stored?

Do you feel discouraged when you think of how much work it takes to take measurements of all the books to be stored in individual boxes? There is no need! For that purpose we can lend you, free of charge, the Bookmeter. With this device, which resembles an aluminium drawer, you can measure a book’s spine width, its width and height in just a few steps. It provides a precise measurement, and the data is wirelessly sent to a table on your computer. This helps you prevent making a mistake, which can happen when taking measurements manually. All you need to do is provide a reference number of each volume and… it’s done! 

This file is then used to produce a custom-made storage product for each volume.

BOOKMETER User Manual Omni-Box

 

Can I choose the material myself?

When preparing a quote for Omni-Box products, we usually decide which material to use based on the construction of the product, its size and the type of object to be stored in it. However, if you would like the product to be made from a different type of cardboard or paper than the one we suggest, write to us and let us know about it. If producing a given product from your preferred material is technically possible, we will take it into account when preparing the quote.  

Where do I find Omni-Box prices?

The prices of Omni-Box storage products are calculated on an individual basis. Select a construction and provide us with dimensions, and we will prepare a quote for you.